Article ListArticle Category

When there are a large number of txt text files, each file contains a chapter of a novel, with the first line being the chapter title. When the number of plain text files is too large, the file names need to be modified according to the first line title of the chapter in the file. Opening each file one by one to check the title and then renaming it not only wastes time but also reduces operational efficiency. Below is an introduction on how to batch replace the txt file names with the first line content of the text files.

In handling various tasks of work or projects, most files have been organized and categorized, with categorized files placed into corresponding folders. When folder names have already been categorized by letters or keywords, how can you quickly search and replace the contents of folder names in cases where multiple folder names need to be updated and replaced in bulk?

When images have high-resolution quality, such as in medical imaging, satellite maps, or image design editing, there is often a need to extract a small portion of the image for closer observation of areas like lesions, surface coverage types, or specific parts of the design image. When handling a large number of images, manually cropping each image individually can waste a lot of time and result in inefficiency. Below is an introduction on how to use a fixed resolution to split a large number of images into dozens of smaller images simultaneously.

After processing the files, some file names with marked dates need to be updated. The old dates in the names need to be uniformly replaced with new dates to make the files more manageable. While searching, you can also quickly distinguish files by the dates in their names. Below is an introduction on how to find existing dates, times, etc., in file names and replace them simultaneously.

When archiving various files, there are many files mixed with Chinese and English, and it is necessary to distinguish between Chinese characters and English letters for easier management and quick file search. If there are many files with Chinese names and American names in the same folder, how can you classify these name files using the first Chinese character or English letter that appears? Below is an introduction on how to distinguish a large number of files based on the first Chinese character or letter in the file name and place them into newly created folders accordingly.

After storing files on the computer, the number of files increases under overlapping changes, and neglecting organization can make the folders chaotic. Therefore, every day's files need to be marked with the date for easier management and searching. After organizing and collecting the files that need a date prefix, renaming each file one by one to input the date prefix on the far left of the file name is very time-consuming. Below is an introduction on how to batch add date and other content to the far left of file names.

To process files on the computer, a suitable file classification and organization method is first needed to achieve fast file search speeds, minimize the number of directory levels opened, and reduce the number of times files are flipped through. If multiple files have related content and their names have already been distinguished by the first character, but they are mixed with other files in multiple folders, how can they all be separated and saved into newly created folders based on the first character?

When processing various personal data archiving in a folder, there will be a large number of files with different names that need to be categorized in the same folder based on the surname represented by the first Chinese character in the filename, making it easier to search and manage. If the number and format of the personal files are too mixed, moving them one by one into designated folders starting with the surname significantly reduces operational efficiency. Below is an introduction on how to batch categorize files based on the first Chinese character in the filename.

After creating multiple files and naming them, in order to carefully distinguish these files based on their content and purpose, a numerical order for the filenames has been adopted to make the files more organized and easier to manage. Once the classification criteria are determined, the next step is to summarize and categorize these files for easier searching and management. Below is an introduction on how to use the first number in the filenames of a large number of files to perform overall classification.

In the process of managing text files, there are a large number of text files with extensions such as txt, html, json, csv, srt, etc., that need to have the first line of text as the filename for easier and more intuitive handling of the files and distinguishing their contents. In plain text files, this is often used for segmenting chapters and titles in novels. Below is an introduction on how to batch rename these Notepad and plain text files using the first line of content as the new filename.

Files of various types stored on the computer have not been properly managed, resulting in a chaotic situation. At this point, trying to organize them again is a test of one's energy and time. Below is an introduction on how to use the first letter of the filenames to batch summarize a large number of files, maintaining the aesthetics of the files on the computer and allowing for quicker access to various files.

To make Office Word documents readable and manageable, and to facilitate a more intuitive understanding of the file content, using meaningful file names is essential. The filename of a docx file can reflect the content and purpose of the file, and a reasonable naming convention can also avoid naming conflicts between files, making management easier and improving efficiency. If you need to use the first line of content as the filename for each file among multiple docx files, it allows us to directly see the content of the file from the filename. Renaming each file individually is inefficient, so below is an introduction on how to batch modify the filenames of a large number of docx files to the first line content of each file.

When searching for a large number of files, the variety of file types can be overwhelming, including numerous different extensions such as docx, ppt, excel, jpg, png, mp4, etc. If classification and organization methods are not handled well, it can easily lead to confusion and make it difficult to find the required content. To manage and locate different files more conveniently, we can categorize them in detail according to their respective extensions, allowing for a clearer and more organized way to structure and summarize the files. By consolidating similar types of files into the same folder, we can easily distinguish between different types of file materials, which not only improves operational efficiency but also makes the file management process smoother and more efficient.

PDF format files can contain various content such as text, images, tables, etc., and can be viewed and shared across different platforms, displaying different formats and layouts on different devices. If you encounter a situation where you need to print a large number of PDF files, you need to merge multiple PDF files and print them double-sided. To ensure that each PDF file can be printed independently, you need to insert a blank page at the end of odd-numbered PDF files to convert them into even-numbered PDF files, avoiding the need to open each file and repeatedly add pages. The following introduces how to batch convert multiple odd-numbered PDF files into even-numbered PDF files.

When working with images in web layout, overly large images can slow down webpage loading speeds, while overly small images may fail to highlight the content of the webpage. Only by splitting images into arbitrary sizes and maintaining appropriate dimensions can the webpage enhance browsing experience and aesthetics. The above content requires splitting images into specific widths and heights to achieve this. Below is an introduction on how to batch split multiple images of the same size into small images of fixed width and height, supporting the following image formats: jpg, jpeg, png, bmp, gif, tif, tiff, webp, tga, avif.

When a computer has too many folders due to storing a large number of files, and there is a need to categorize and manage them based on file content; or when backing up folder contents, adding prefixes such as the time or type of the folder content to the folder names is an essential method that can help us find the required folders more quickly. If the number of folders is too large, renaming each folder one by one to add a prefix to the folder name can be tedious. Below is an introduction on how to avoid this situation and batch add prefix content to the leftmost side of all folder names, saving time on inputting names.

In certain specific scenarios, we need to evenly split an image into various smaller images to better manage and utilize image data. For example, some marketing tasks such as operations and copywriting require the use of grid cuts like a 3x3 grid or 2x3 grid, which stand out uniquely. A complete image divided into multiple parts and then reassembled into a whole can enhance details and elevate the layout in an article. Compared to a complete large image, the split images will have smaller individual sizes, thus speeding up page response times and improving browsing experience. Below is an introduction on how to sequentially split a large number of single images into any desired number of images, supporting the following image formats: jpg, jpeg, png, bmp, gif, tif, tiff, webp, tga, avif.

After creating files, for convenience in organizing and storing, different files are often placed into different folders for aggregation and categorization. The contents of the files may be updated, and the folder names may also change. When the number of files becomes too large and there are too many folders to classify, improper management can easily lead to confusion in folder names. A good folder name can save a lot of effort and help us intuitively understand the contents of the files within the folder. If multiple folder names contain some identical text, letters, or symbols, renaming them one by one to remove these parts can significantly reduce efficiency. Below is a guide on how to batch delete identical content from multiple folder names.

In certain situations, to make files more clearly and transparently indicate their content, it is necessary to express it intuitively in the file name. If there are a large number, even hundreds or thousands of files, for easier management, suffix content needs to be added to the far-right end of the file names. These files can then be sorted and categorized based on their name content. Manually renaming and adding suffixes one by one not only wastes time but also reduces efficiency. Below is an introduction on how to batch add the same text, numbers, or other content to the end of multiple file names.

A large number of documents, images, videos, and other files stored on a computer are usually organized into folders. Folders help us organize and manage files, making it faster and easier to browse files and locate the ones we need. Naming folders is also very important. A good folder name can intuitively convey the content of the files inside. When the number of folders becomes too large, distinguishing them by name alone may be inadequate. At this point, adding suffix text to the names of multiple folders that need to be highlighted makes it easier to differentiate between different types of folders. Below is an introduction on how to add suffix text to multiple folder names.

Every day, a large number of files are stored in the folder. Over time, as the number of files increases, these file names may have duplicates, making them difficult to search and manage. Removing duplicate content from multiple file names allows us to intuitively browse and quickly locate the required files based on their names, making the files more uniform and standardized. If the number of files is large, renaming them one by one would reduce efficiency. Below is an introduction to how to batch remove duplicate numbers, symbols, or letters in the names of multiple files.

After creating multiple files, you need to organize and classify them based on content, time, and extension, and then move them to different folders. If the created files and folders are highly related but need to be organized and summarized by modification time, file extension, etc., and saved in folders with similar numbers, symbols, or keywords in their names, renaming folder names one by one after completing the contents within them is very time-consuming and reduces operational efficiency. Below is an introduction on how to use folder name keywords to batch modify multiple folder names uniformly.

When files are used in different situations, their names are often modified. When organizing files that need to be classified by type or when file names need to be updated, the names of the files often need to be modified. If there are only a few files to rename, you can directly change their names at their saved location. However, if many files need to be renamed, modifying them one by one becomes very tedious and inefficient. The following introduces how to search for the same keywords in file names across multiple folders and replace them in batches. This supports various file formats such as docx, pptx, xlsx, txt, and pdf.

File organization and categorization have always been essential. When managing different file formats across multiple folders, adding the same prefix or suffix to filenames makes it easier to handle them. We can quickly identify file types and content based on prefixes and suffixes, helping us easily locate files and accurately categorize them into corresponding folders. When dealing with a large number of files, adding consistent prefixes and suffixes makes files more identifiable at a glance, eliminating the tedious work of organizing and categorizing. Below, we'll introduce how to quickly batch add the same prefix and suffix text or numbers to filenames of word, ppt, excel, pdf, and txt format files across multiple folders.

Here is the release record of all versions of the "Batch Image Annotation Tool." Each release aims to resolve the various issues encountered by users, representing our growth and progress. We hope you continue to support and enjoy our software!

This is a brand new software that can batch add graphic or text annotations to many jpg, png, and other images. It can batch draw curves and straight lines on images, as well as rectangles, circles, and add various shapes such as arrows. It supports pasting images directly from the system clipboard.

This is a small utility software that quickly processes the current system clipboard content. After selecting the content with the mouse, by quickly pressing Ctrl + C + C, this tool will automatically process the clipboard content immediately. It can easily export the clipboard content to image, Notepad, Word, and PDF files, and can also calculate mathematical expressions in the clipboard and display colors in real-time, among other features.

This is a small utility software that quickly processes the current system clipboard content. After selecting the content with the mouse, by quickly pressing Ctrl + C + C, this tool will automatically process the clipboard content immediately. It can easily export the clipboard content to image, Notepad, Word, and PDF files, and can also calculate mathematical expressions in the clipboard and display colors in real-time, among other features.